banner



Audi C5 19" Wheels Audi C5 Rs6 Wheels

  1. #1

    dantheman762 is offline

    Established Fellow member Two Rings dantheman762's Avatar



    OEM C5 RS6 19" wheels fit an Allroad?

    Merely wondering if the widebody of the allroad would allow the euro-spec OEM RS6 5-spoke 19" rims (ET ?) to fit with the stock intermission on it's lowest setting? Tried searching for this,thou but couldn't find information technology. Thanks.

    The left lane is for PASSING!

    2016 RS7; Sepang Blueish, B&O, carbon eyes, TSW Bathurst 21x9, VCDS lowered
    2020 Toyota Tundra; TRD Off-Road, Crewmax, Premium Packet (wife'southward vehicle)
    2006 Yamaha R6; total Yoshimura exhaust, Moore Mafia tuned.
    2019 Yamaha YZ250F; SSS full suspension revalve, No Toil SuperFlow airbox & filters, Cycra PowerFlow plastic, TP connected response map.
    B8 S4; Phase 1... Gone
    2010 Subaru STi; Phase 1... Gone
    B5 A4... Gone


  2. #2

    wofman is offline

    Veteran Member Four Rings wofman's Avatar



    Re: OEM C5 RS6 19" wheels fit an Allroad?

    Hmmm. Who would know nigh this .... (respond will presently be yes and probably something about spacers)

    fwiw, I similar the allroad rims -- esp for wintertime

    Nothing going to bring information technology back: 2000 C5 2.7T 6sp MT
    Ming Bluish, S6 Blades, EuroSpoiler,
    GIAC-93, AWE DPs to Milltek Catback,
    RS4 Clutch, JHM DT-Stabilizer, VAST Short-Shifter,
    H&R Sways, Eibach Pro-kit, Bilstein Sport Shocks, etc., ...

    Now:

    '10 Jetta TDI w 6MT, Revo Tune Commuter Machine


  3. #3

    ChescoS6 is offline

    Veteran Member 3 Rings ChescoS6's Avatar



    Re: OEM C5 RS6 19" wheels fit an Allroad?

    Can the fenders on the allroad be rolled? If so I say definately. I had 19x8.5 et20 wheels on my C5 S6 (too widebody) with 255/thirty/nineteen tires and slammed on H&R coilovers and it fit. It rubbed over dips and bumps then I raised it up ane/2" or and then and was fine. Rolling the fenders would accept made it a not-issue I would think.


  4. #4

    dantheman762 is offline

    Established Member Ii Rings dantheman762's Avatar



    Re: OEM C5 RS6 xix" wheels fit an Allroad?

    Ah, I should accept been more than specific in my original question... Will the OEM C5 RS6 Euro-spec 19" wheels fit an Allroad with stock pause at setting ane (everyman) without rolling fenders, cutting fender liners, etc.?

    I think I've found the ET of those OEM C5 RS6 euro-spec 19's as existence 20, but can someone ostend? I'grand not besides worried that they'll clear the brakes on an AR, since they were fabricated to clear Brembo eight-pots

    The left lane is for PASSING!

    2016 RS7; Sepang Blue, B&O, carbon eyes, TSW Bathurst 21x9, VCDS lowered
    2020 Toyota Tundra; TRD Off-Road, Crewmax, Premium Package (married woman's vehicle)
    2006 Yamaha R6; full Yoshimura exhaust, Moore Mafia tuned.
    2019 Yamaha YZ250F; SSS total suspension revalve, No Toil SuperFlow airbox & filters, Cycra PowerFlow plastic, TP connected response map.
    B8 S4; Phase 1... Gone
    2010 Subaru STi; Stage 1... Gone
    B5 A4... Gone


  5. #v

    ChescoS6 is offline

    Veteran Member Three Rings ChescoS6's Avatar



    Re: OEM C5 RS6 nineteen" wheels fit an Allroad?

    Is the allroad lowest setting i lower than this??

    Those are 19x8.5 et20.


  6. #6

    dantheman762 is offline

    Established Member Two Rings dantheman762's Avatar



    Re: OEM C5 RS6 19" wheels fit an Allroad?

    Quote Originally Posted by ChescoA4 View Post

    Is the allroad everyman setting 1 lower than this?? Those are 19x8.five et20.

    I dubiousness it. If those fit with no rubbing, then it'southward just a thing of finding those OEM RS6 19's. Thanks for that pic.

    The left lane is for PASSING!

    2016 RS7; Sepang Bluish, B&O, carbon optics, TSW Bathurst 21x9, VCDS lowered
    2020 Toyota Tundra; TRD Off-Road, Crewmax, Premium Parcel (wife's vehicle)
    2006 Yamaha R6; full Yoshimura exhaust, Moore Mafia tuned.
    2019 Yamaha YZ250F; SSS total suspension revalve, No Toil SuperFlow airbox & filters, Cycra PowerFlow plastic, TP continued response map.
    B8 S4; Stage 1... Gone
    2010 Subaru STi; Phase one... Gone
    B5 A4... Gone


  7. #7

    ccomengee86 is offline

    Veteran Member Three Rings ccomengee86's Avatar



    Re: OEM C5 RS6 nineteen" wheels fit an Allroad?

    You can't ringlet allroad's fender. They're plastic.

    At level 1 w/ 402 mod. (10mm downward)

    Stock 17's w/ 225/55/17 tires.


  8. #viii

    white fish is offline

    Veteran Fellow member Four Rings white fish's Avatar



    Re: OEM C5 RS6 19" wheels fit an Allroad?

    how wide is the OEM RS6 wheel?

    IF

    et is 20 and the rim is wider then 7.5 you volition hitting intermission


  9. #9

    FrankA6 is offline

    Veteran Member Four Rings FrankA6's Avatar



    Re: OEM C5 RS6 19" wheels fit an Allroad?

    OEM 5 spoke RS6 wheels are 19x9 with a 35ET...so they wont be very aggressive, just i run 18x8.5 20ET b5 rs4 wheels on my narrow trunk A6 and they fit very hands...so the respond is yeah, they volition piece of work. run 245 or 255 tires. next?

    Last edited by FrankA6; 11-13-2009 at 08:49 PM.

    2004 Audi A6 2.7T
    2012 Volvo S60 R-Design


  10. #10

    dantheman762 is offline

    Established Member 2 Rings dantheman762's Avatar



    Re: OEM C5 RS6 19" wheels fit an Allroad?

    Quote Originally Posted by FrankA6 View Post

    OEM five spoke RS6 wheels are 19x9 with a 35ET...so they wont exist very aggressive, but i run 18x8.v 20ET b5 rs4 wheels on my narrow body A6 and they fit very easily...so the respond is yes, they volition work. run 245 or 255 tires. next?

    Awesome - thanks. 35ET makes a 9" rim fit. Give thanks yous.

    The left lane is for PASSING!

    2016 RS7; Sepang Blue, B&O, carbon optics, TSW Bathurst 21x9, VCDS lowered
    2020 Toyota Tundra; TRD Off-Road, Crewmax, Premium Package (wife's vehicle)
    2006 Yamaha R6; full Yoshimura exhaust, Moore Mafia tuned.
    2019 Yamaha YZ250F; SSS full suspension revalve, No Toil SuperFlow airbox & filters, Cycra PowerFlow plastic, TP connected response map.
    B8 S4; Stage 1... Gone
    2010 Subaru STi; Stage 1... Gone
    B5 A4... Gone


  11. #11

    FrankA6 is offline

    Veteran Member Four Rings FrankA6's Avatar



    Re: OEM C5 RS6 19" wheels fit an Allroad?

    2004 Audi A6 2.7T
    2012 Volvo S60 R-Pattern


  12. #12

    Keithr726 is offline

    Established Member Two Rings Keithr726's Avatar



    Re: OEM C5 RS6 19" wheels fit an Allroad?

    Quote Originally Posted by FrankA6 View Post

    OEM 5 spoke RS6 wheels are 19x9 with a 35ET...so they wont exist very aggressive, but i run 18x8.5 20ET b5 rs4 wheels on my narrow trunk A6 and they fit very hands...and so the answer is yes, they volition work. run 245 or 255 tires. next?

    oooo pics delight

    In the corral:
    2014 Estoril Bluish S4
    2007 Brilliant Black A6 iv.2
    2004 Midnight Blue A6 two.7t
    1986 Guards Red Porsche 951


  13. #thirteen

    white fish is offline

    Veteran Member Four Rings white fish's Avatar



    Re: OEM C5 RS6 xix" wheels fit an Allroad?

    FrankA6 the allroad is very different from a A6


  14. #xiv

    FrankA6 is offline

    Veteran Fellow member Four Rings FrankA6's Avatar



    Re: OEM C5 RS6 xix" wheels fit an Allroad?

    Quote Originally Posted by white fish View Post

    FrankA6 the allroad is very different from a A6

    i know, but 19x9 with a 35ET is not much at all really. In that location's alot of guys on this site with the allroad that are using much much more than ambitious wheels than that. hell i ran 18x9 30ET wheels on my machine before and it was fine.

    and Keithr726, this is how the car sits now, but its going lower next twelvemonth with some more than changes......

    2004 Audi A6 2.7T
    2012 Volvo S60 R-Design


  15. #fifteen

    white fish is offline

    Veteran Member Four Rings white fish's Avatar



    Re: OEM C5 RS6 nineteen" wheels fit an Allroad?

    aye ok then
    I have 19x9 et 35 on my AR demand 15mm spacers all effectually no rubbing

    imposible with out spacers is all I am saying


  16. #sixteen

    doobiesdaddy is offline

    Forum Moderator Iv Rings doobiesdaddy's Avatar



    Re: OEM C5 RS6 19" wheels fit an Allroad?

    Quote Originally Posted by white fish View Post

    yeah ok then
    I have 19x9 et 35 on my AR need 15mm spacers all around no rubbing

    imposible with out spacers is all I am saying

    I'm running 9.5x18 et20 275/twoscore with 4mm spacers all effectually. No rubbing.

    Terminal edited by doobiesdaddy; eleven-14-2009 at 07:43 PM.

    Dave - Moderator
    Issue? send me an email

    When I went to school, they asked me what I wanted to exist when I grew up. I wrote downwards �happy�. They told me I didn�t understand the consignment, and I told them they didn�t understand life.
    -John Lennon


  17. #17

    G Men 08 is offline

    Veteran Member Four Rings G Men 08's Avatar



    Re: OEM C5 RS6 19" wheels fit an Allroad?

    gumby has 18x9 wheels et 20 on his allroad and they fit beautifully

    take a looksy--http://www.audizine.com/forum/showthread.php?t=325286

    B6 A4 3.0-sold
    C5 A6 4.2-sold
    C4 A6 2.8-sold
    B5 S4 A few mods-SOLD thankfully!!
    MKIV Golf game TDI- SOLD MPG were amazing just other than that...
    C5 allroad two.7 automobile


  18. #18

    lawdogg is offline

    Senior Member 3 Rings lawdogg's Avatar



    Re: OEM C5 RS6 19" wheels fit an Allroad?

    Quote Originally Posted past Yard Men 08 View Post

    Those Rota P45R's are ix.v" broad. :)

    http://www.wheeldude.com/catalog/ind...0670a0e021e67f


DOWNLOAD HERE

Audi C5 19" Wheels Audi C5 Rs6 Wheels

Posted by: shieldsticheir62.blogspot.com

0 Response to "Audi C5 19" Wheels Audi C5 Rs6 Wheels"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel